Downloads
Rikaline USB GPS Driver
This is the driver for the Rikaline USB GPS that Maptech used to offer as an
accessory for its Navigation software products. It is the same driver that is
included on the CD that accompanied the GPS and is required to use the GPS on
any computer.
To Install
the Driver
1. Close all programs and temporarily disable any antivirus software.
2. Download and unzip the file below.
3. Plug in the Rikaline GPS receiver. When prompted for the location of the
driver, browse to the folder where you unzipped the file.
4. Follow the on-screen instructions to complete the installation.
To Verify the COM Port used by the GPS
1. Click Start, Control Panel, Performance & Maintenance, System, Hardware,
Device Manager.
2. In the list, find "Ports (COM & LPT)" and check the Virtual COM Port, which
was created by the USB driver. For example: USB to Serial Port [COM #].
3. Use this COM Port when connecting to the GPS. Or, use the GPS Setup Wizard
that is included with Maptech's suite of Navigation products to connect the GPS
to the software.
Please note that the Virtual COM Port number might be different on every
computer or may change each time new devices are installed.
|
|
File Name
|
File Size
|
Version
|
Requirements
|
|
|
|
87.98 KB
|
1.4
|
Requires Rikaline USB GPS receiver.
DO NOT USE WITH OTHER GPS DEVICES!
|
 |
gps-6010-manual-e.pdf |
228.42 KB |
Sept. 2002 |
Requires Adobe Acrobat Reader. |
Back to Downloads